Ball bearings (5x11x4mm) (8) |
Improve the performance of your bushing-equipped vehicle with this bearing upgrade kit with eight 5x11x4 mm ball bearings |
#4607 | $24.00 |
Ball bearings (5x8x2.5mm) (2) |
Steel ball bearings deliver more speed and increase the life of moving parts by reducing friction. Bearings also last longer and require less maintenance than bushings. |
#2728 | $8.00 |
Ball bearings, blue rubber shield (5x8x2.5mm) (2) |
Pair of 5x8x2.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. |
#5114 | $4.00 |
Ball bearings, blue rubber sealed (5x11x4mm) (2) |
Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. |
#5116 | $3.50 |
Body, Nitro Rustler® (clear, requires painting)/window, grille, lights decal sheet/ wing and aluminum hardware |
From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Wing, wing hardware, and decals also come in the kit. |
#4412 | $24.95 |
Official Team Traxxas® racing decal set(flag logo/ 6-color) |
The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start®, Stinger™ Motors, ProGraphix®, TRX® engines and www.Traxxas.com logos. Perfect for adding that “final touch” to your Traxxas ProGraphix painted body, or your own personal paint designs. |
#9950 | $4.50 |
Decal sheet, racing sponsors |
Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker headers. All the logotypes are faithfully produced and fully licensed. |
#2514 | $3.00 |
Antenna caps, vinyl (2)/ antenna spool |
Replacement vinyl antenna caps help protect the vital end of your antenna from rollover damage. The spool can be used to wrap up excess antenna wire length. |
#1926 | $2.00 |
Clutch bell (22-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part 4611) |
The 22-tooth (32-pitch) clutch bell is made from durable steel for long-lasting performance. Includes 5x8x.5 mm fiber washers (2) and 5 mm E-Clips (2). Clutch bells are available in a variety of sizes to fine-tune your truck's gear ratios for more torque or higher top speed. (Requires two 5x8x2.5 mm ball bearings) |
#4122 | $12.00 |
Clutch bell (20-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part 4611) |
The 20-tooth (32-pitch) clutch bell is made from durable steel for long-lasting performance. Includes 5x8x.5 mm fiber washers (2) and 5 mm E-Clips (2). Clutch bells are available in a variety of sizes to fine-tune your truck's gear ratios for more torque or higher top speed. (Requires two 5x11x2.5 mm ball bearings) |
#4120 | $12.00 |
Flywheel (large, knurled for use with starter boxes) |
Swap out your standard flywheel with this oversize knurled flywheel for use with starter boxes. |
#6542X | $12.00 |
FLYWHEEL WITH MAGNET (35MM) |
Use the nitro flywheel with embedded telemetry magnet to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with Traxxas Link™ Wireless Module, and the free Traxxas Link app for your mobile device. |
#6542 | $8.00 |
FLYWHEEL WITH MAGNET (35MM) |
Use the nitro flywheel with embedded telemetry magnet to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with Traxxas Link™ Wireless Module, and the free Traxxas Link app for your mobile device. |
#6542 | $8.00 |
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) |
Traxxas steel constant velocity driveshafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look. |
#6852R | $69.95 |
Carriers, stub axle (blue-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware |
Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry. The complete installation kit includes hardened-steel hinge pins, e-clips, and hardware. |
#1952X | $25.95 |
Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware |
Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry. The complete installation kit includes hardened-steel hinge pins, e-clips, and hardware. |
#1952T | $25.95 |
Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware |
Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a beautifully-anodized finish without compromising their track-bred suspension geometry. The complete installation kit includes hardened-steel hinge pins, e-clips, and hardware. |
#1952G | $25.95 |