Ford F-150 Raptor R (101076-4) Chassis Assembly Exploded View

10111: Body, Ford Raptor R (clear, requires painting)/ window masks/ decal sheets

10112-BLK: Body, Ford Raptor R, complete (black) (includes grille, tailgate trim, side mirrors, decals, & clipless mounting) (requires #10124 & 10125 body mounts)

$139.95

10112-BLUE: Body, Ford Raptor R, complete (blue) (includes grille, tailgate trim, side mirrors, decals, & clipless mounting) (requires #10124 & 10125 body mounts)

$139.95

10112-RED: Body, Ford Raptor R, complete (red) (includes grille, tailgate trim, side mirrors, decals, & clipless mounting) (requires #10124 & 10125 body mounts)

$139.95

10120: Grille/ grille mount/ 3x10 BCS (7) (fully assembled, includes installed headlight lenses and decals) (fits #10111 body)

$20.00

10121: Tailgate trim/ trim mount/ 3x10mm BCS (7)/ decals (attaches to #10111 body)

$12.00

10122: Chassis/ adapter, center driveshaft cover

$25.00

10125: Body mount, rear/ inserts (2) (for clipless body mounting)

$10.00

10142: Latch, body mount, front/ hood insert/ 3x8mm BCS (5) (for clipless body mounting) (attaches to #10111 body)

$11.00

10143: Side mirrors (left & right)/ mirror mounts (left & right)/ 3x14mm BCS (2) (attaches to #10111 body)

$6.00

10144: Latch, body mount, rear/ rear latch mount (2)/ 3x8mm BCS (4) (for clipless body mounting) (attaches to #10111 body)

$8.00

10152: Bumper, rear/ bumper mounts, rear (upper & lower) (fits Ford Raptor R)

$14.00

10155: Driveshaft, center, 6061-T6 aluminum (blue-anodized) (274mm)

$11.00

10181: Tires, BFGoodrich® All-Terrain™ T/A® KO2 (dual profile 4.5x1.7- 2.2/3.0") (2)/ foam inserts (2)

$19.95

10187-BLKCR: Tires & wheels, assembled, glued (Ford Raptor R black chrome wheels, BFGoodrich® All-Terrain™ T/A® KO2 tires, foam inserts) (2) (4WD front/rear, 2WD rear)

$29.95

1726: Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1)

$1.00

1747A: Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)

$7.50

1747G: Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

$7.50

1747P: Nuts, 4mm flanged nylon locking (aluminum, pink anodized) (4)

$7.50

1747R: Nuts, aluminum, flanged, serrated (4mm) (blue-anodized) (4)

$7.50

1747T: Nuts, aluminum, flanged, serrated (4mm) (orange-anodized) (4)

$7.50

1765: Silicone diaphragms (4)

$2.00

1926: Antenna caps, vinyl (2)/ antenna spool

$2.00

1942: Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws (2)

$7.00

1985: PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)

$2.00

2362: Shock rebuild kit (for 2 shocks)

$2.50

2523: Screws, 2.5x10 countersunk machine (hex drive) (6)

$2.50

2534: Screws, 3x6mm countersunk machine (6) (hex drive)

$2.50

2550: Screws, 3x8mm countersunk machine (6) (hex drive)

$2.50

2551: Screws, 3x10mm countersunk machine (6) (hex drive)

$2.50

2552: Screws, 3x12mm countersunk machine (6) (hex drive)

$2.50

2554: Screws, 3x6mm caphead machine (hex drive) (6)

$2.50

2557: Screws, 3x30mm cap-head machine (hex drive) (6)

$2.50

2575: Screws, 3x6mm button-head machine (hex drive) (6)

$2.50

2576: Screws, 3x8mm button-head machine (hex drive) (6)

$2.50

2577: Screws, 3x10mm button-head machine (hex drive) (6)

$2.50

2578: Screws, 3x12mm button-head machine (hex drive) (6)

$2.50

2579: Screws, 3x15mm button-head machine (hex drive) (6)

$2.50

2580: Screws, 3x20mm button-head machine (hex drive) (6)

$2.50

2593: Screws, 3x14mm button-head machine (hex drive) (6)

$3.00

2656: Shock shafts, steel, chrome finish (xx-long) (2)

$3.00

2656T: Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

$10.00

2742X: Rod ends, short (6)/ hollow balls (6)

$4.00

2743: Set (grub) screws, 3mm hardened (12)

$3.00

2745: Nuts, 3mm nylon locking (12)

$2.00

2754: Stub axle pins (4)

$1.00

3236: Screws, 2.5x12mm cap-head machine (6)

$2.50

3351R: Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)

$89.95

3354R: Motor cover, endbell (Velineon® 3500)

$3.00

3355R: VXL-3s Waterproof Electronic Speed Control (brushless) (fwd/rev/brake)

$99.95

3644: Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)

$7.00

3644G: Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

$32.95

3644R: Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

$32.95

3644X: Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

$32.95

3647: Nuts, 4mm flanged nylon locking (steel, serrated) (8)

$3.25

3655G: Suspension arms, green, front/rear (left & right), heavy duty (2)

$12.00

3655L: Suspension arms, red, front/rear (left & right), heavy duty (2)

$12.00

3655P: Suspension arms, blue, front/rear (left & right), heavy duty (2)

$12.00

3655R: Suspension arms, front/rear (left & right), heavy duty (2)

$12.00

3655T: Suspension arms, orange, front/rear (left & right), heavy duty (2)

$12.00

3766A: Body, Ultra Shock (XXL) (grey) (2)

$3.00

3768: Spring retainers, upper & lower (2)/ piston head set (2-hole (2)/ 3-hole (2))

$3.00

3769: Spring pre-load spacers: 1mm (4)/ 2mm (2)/ 4mm (2)/ 8mm (2)

$4.00

3932: Screws, 3x6mm flat-head machine (hex drive) (6)

$2.50

3936: Screws, 4x10mm button-head machine (hex drive) (6)

$2.50

3937: Screws, 4x12mm button-head machine (hex drive) (6)

$2.50

3943X: Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw

$5.95

3956: Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

3956X: Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$15.00

3965: Screws, 2.5x8mm cap-head machine (6)

$2.50

3981: PTFE-coated Washers, 6x9.5x0.5mm (10) (use with ball bearings)

$1.25

5116: Ball bearings, blue rubber sealed (5x11x4mm) (2)

$3.50

5117A: Ball bearings, black rubber sealed (6x12x4mm) (2)

$4.00

5118: Ball bearings, blue rubber sealed (8x16x5mm) (2)

$6.00

5119: Ball bearings, blue rubber sealed (10x15x4mm) (2)

$7.00

5119A: Ball bearings, black rubber sealed (10x15x4mm) (2)

$7.00

5120: Ball bearings, blue rubber sealed (12x18x4mm) (2)

$8.00

5120A: Ball bearings, black rubber sealed (12x18x4mm) (2)

$8.00

5142: Screws, 3x15mm caphead machine (hex drive) (with split and flat washers) (6)

$2.75

5282: Screws, 3x12mm button-head machine (6) (Starter attachment screws w/ threadlock)

$3.00

5351: Slipper pressure plate and hub (alloy)

$8.00

5352X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

$7.50

5381: Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

$4.25

5452: U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)

$10.00

5525: Rod ends (12)/ hollow balls (12)

$9.00

5552X: Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

$10.00

5556: Slipper pressure plate & hub (aluminum alloy)

$8.00

6533: Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)

$39.95

6780: Differential kit, center (complete) (aluminum carrier)

$69.95

6780A: Differential kit, center (complete)

$60.00

6781: Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock) (4)

$19.95

6782: Output gears, center differential, hardened steel (2)

$24.95

6783: Gear set, differential (spider gears (4)/ spider gear shaft (2))

$10.00

6789: Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)

$34.95

6823: Bulkhead tie bars, front & rear, aluminum (blue-anodized)

$7.00

6823G: Bulkhead tie bars, front & rear, aluminum (green-anodized)

$7.00

6823R: Bulkhead tie bars, front & rear, aluminum (red-anodized)

$7.00

6829: Bulkhead, rear

$6.00

6834: Suspension pin set, complete (front and rear)

$4.00

6841: Cover, center driveshaft (clear)

$4.00

6842: Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6842X: Spur gear, steel, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

$15.00

6843: Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)

$3.00

6860A: Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

$4.00

6860R: Motor mount, 6061-T6 aluminum (blue-anodized)

$34.95

6868: Springs, rear (progressive, +20% rate, blue) (2)

$6.50

6877: Cover, gear/ motor wire hold-down clip

$4.50

6877A: Cover, gear (clear)

$4.50

6879: Ring gear, differential/ pinion gear, differential (rear)

$15.00

6879R: Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)

$39.95

6880: Housings, differential, rear

$4.00

6882X: Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)

$15.00

6888: Drive hub, center, rear (1)/ 4x3 GS (1)

$5.00

6890: Plate, motor

$7.00

6890R: Plate, motor, 6061-T6 aluminum (red-anodized)

$15.00

6890X: Plate, motor, 6061-T6 aluminum (blue-anodized)

$15.00

6893: Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)

$6.50

6893G: Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

6893X: Bearing adapter, 6061-T6 aluminum (blue-anodized) (1)/10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

$5.00

7423: Nerf bars, chassis (2)

$4.00

7424: Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2)

$12.00

8327: Battery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)

$6.50

8361: Shock caps (black) (4) (assembled with hollow balls)

$5.00

9039: Shock tower, rear, extreme heavy duty, black (for use with #9080 upgrade kit)

$6.00

9039-GRAY: Shock tower, rear, extreme heavy duty, gray (for use with #9080 upgrade kit)

$6.00

9039G: Shock tower, rear, extreme heavy duty, green (for use with #9080 upgrade kit)

$6.00

9039R: Shock tower, rear, extreme heavy duty, red (for use with #9080 upgrade kit)

$6.00

9039T: Shock tower, rear, extreme heavy duty, orange (for use with #9080 upgrade kit)

$6.00

9039X: Shock tower, rear, extreme heavy duty, blue (for use with #9080 upgrade kit)

$6.00

9042: Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade kit)

$4.00

9042X: Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit)

$15.00

9050: Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050-GRAY: Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050G: Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050R: Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050T: Carriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9050X: Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)

$6.00

9051: Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit)

$14.00

9052: Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit)

$14.00

9052R: Driveshafts, rear, extreme heavy duty, steel-spline constant-velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)

$79.95

9055: Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit)

$8.00

9056: Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit)

$8.00

9057: Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit)

$10.00

9069: Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles)

$10.00

9081: Housing, center differential/ x-ring gaskets (2)/ 5x10x0.5 PTFE-coated washer (1)/ 2.5x10 CCS (4)

$5.00

9090X: Gear adapter, fixed

$4.00

Ford F-150 Raptor R (101076-4) Chassis Assembly Exploded View

Ford F-150 Raptor R (101076-4) Body Assembly Exploded View

Ford F-150 Raptor R (101076-4) Chassis Assembly Exploded View

Ford F-150 Raptor R (101076-4) Driveshafts Assembly Exploded View

Ford F-150 Raptor R (101076-4) Front Assembly Exploded View

Ford F-150 Raptor R (101076-4) Rear Assembly Exploded View

Ford F-150 Raptor R (101076-4) Transmission Assembly Exploded View

View PDF

Enter your email address to Subscribe.